High-Pressure Hydro Jetting Sewer Cleaning
High-pressure water jetting (up to 4,000 PSI) to scour pipe walls clean of grease, scale, and roots.
Hydro jetting uses specialized reverse-propelling nozzles and high-pressure water streams (3,000 to 4,000 PSI at 8-18 GPM) to scour the entire 360-degree interior of sewer and drain pipes. Unlike mechanical snakes that only poke holes through clogs, hydro jetting restores pipe walls to bare metal or plastic.
Common Causes & Root Factors
- Hardened grease buildup and fat deposits in commercial kitchens and residential lines
- Fine feeder roots clinging to pipe walls that mechanical snakes pass right through
- Mineral scale and tuberculation restricting flow in older cast iron piping
- Sand, mud, and construction debris accumulated in storm and sanitary drains
Observable Warning Signs
- Recurring drain clogs occurring every few months despite regular snaking
- Commercial kitchen floor drains backing up during high-volume dishwashing
- Camera inspection showing thick layers of hardened grease or scale narrowing pipe diameter
- Foul odors persisting even after water is flowing
What Professional Hydro Jetting & High-Pressure Scouring Involves
Pre-Jetting Camera Inspection
Inspect line integrity with video camera to ensure pipe is structurally sound for high pressure.
Nozzle Selection & Jetting
Select specialized nozzle (cornering, penetrator, or root-sawing) and feed hose through cleanout.
Full 360-Degree Scouring
Propel nozzle downstream and slowly pull back under pressure to scrub pipe walls clean.
Post-Jetting Video Audit
Perform final camera pass to document completely restored, scale-free pipe walls.
Homeowner Checklist
- Verify that a sewer camera inspection is performed before hydro jetting to confirm pipe stability
- Confirm accessible cleanout locations with direct outdoor entry
- Request before-and-after video footage for documentation
Safety Warnings
- Hydro jetting pressures can penetrate skin and cause severe internal injuries; strict safety gear and foot pedals are mandatory
- Never hydro jet badly broken, crushed, or thin-walled Orangeburg pipes; high pressure can cause complete structural blowout
Frequently Asked Questions
Is hydro jetting safe for older pipes?
Hydro jetting is safe for sound cast iron and PVC pipes, but a video camera inspection must always be conducted first to ensure pipes are not severely cracked or collapsed.
How long does hydro jetting keep pipes clear?
Because hydro jetting completely washes away the sticky grease and mineral film that catches debris, lines typically stay clear significantly longer than after basic cable snaking.
Need a Plumber in Your Area?
Call (833) 421-9556 to connect with local plumbing assistance.
Call (833) 421-9556